傳感器采用固態技術（無可動部件）不銹鋼接頭DN15-DN350,黃銅接頭DN15-DN50,PVC、PP和PVDF接頭DN15-DN400插入式電磁流量計 8040型插入式電磁流量計適用于DN15至DN400的管道。接頭材質為不銹鋼、黃銅、PVC、PP和PVDF，內/外螺紋、法蘭、夾式等各種接口。尤其適用于電導率大于20 S/cm的液體。如有必要，已安裝了的Burkert渦輪流量變送器可在幾分鐘內升級為電磁流量變送器。技術參數測量原理0.1 2m/s,0.1 5m/s,0.1 10m/s測量誤差在線校正標準K系數1 10m/s 2%OR1) 4%OR1)精度 2%OR1)溫度系數DN15=+0.2%/K2)DN20,DN25=+0.1%/K2) DN25=+0.05%/K2)介質電導率 20 S/cm介質溫度黃銅、不銹鋼接頭PVC接頭PP接頭PVDF接頭環境溫度貯存溫度0to80 C(32to176 F),highertemperatures(to150 C,3020to50 C(32to122 F)0to80 C(32to176 F)0to80 C(32to176 F)0to60 C(32to140 F)0to60 C(32to140 F)壓力等級PN6（取決于接頭材質，參見下頁的壓力-溫度圖）外殼防護等級IP65(NEMA4)材質傳感器本體傳感器電極O形圈外殼PVDF不銹鋼1.4404/316L標準供貨FPMPEHD接頭-材質及尺寸不銹鋼黃銅PVC、PP和PVDFDN15toDN50/DN65toDN350(weld-o-let)DN15toDN50DN15toDN50(trueunionandsolventspigot)DN65toDN200(saddle)/DN65toDN400(weld-o-let)電源18-36VDC;regulated最大電流消耗接公共負端時100mA接公共正端時200mA脈沖輸出0to240Hz(max.340Hz)集電極開路PNP或NPN4-20mA輸出Max.load1130Ohm/36VMax.load330Ohm/18V