一、道路標線反光玻璃微珠 Reflectivity glass beads for road marking 反光型玻璃珠是道路標線涂料必備材料，主要用于道路標線，標志牌，護欄輪廓標識等。主要分為熱熔涂料預混合型和施工面撒型兩種。 Reflectivity glass beads as the necessary material for the road marked line, mainly used for road marked line, denoter, and identification for the guardrail out line. It divide into intermix glass beads, and drop on glass beads. 我公司產品除達到中國JT/T446-2001外，還可以生產符合英國BS6088-A標準，美國AASHONO.Ⅰ標準和美國AASHONO.Ⅱ標準，歐洲D(zhuǎn)ropONTypeEN1423標準和Pre-MIXTypeEN1424標準，澳洲AS2009B3.2標準，和韓國的ＫＳ標準。還可以根據用戶需求提供850um(20目)-43um(325目)標準范圍之間的不同粒徑、不同配比的不同產品。 Our company products was achieved the standardJT/T446-2001 of chine, we also can produce the products in according to the standard BS6088-A of England, AASHONO.Ⅰand AASHONO.Ⅱof American, DropONTypeEN1423 and Pre-MIXTypeEN1424 of Europe, AS2009B3.2 of Australia and KS of Korea etc. At the same time, we also can supply from 850um(20mesh) to 43um(325mesh) different size, different proportion products according to the customer required l預混型（Intermix glass beads） 在道路涂料生產過程中，將玻璃珠按照18-25%的重量比例（參照中國交通行業標準JT/T280-2004，不同國家和地區標準有所不同）混入涂料中，在涂料交付施工使用后，能夠經歷多次與車輪摩擦磨損也有反光性。按照中國國家標準GB/T24722-2009,此種玻璃珠的技術參數如下： During the production of marking paint, mix glass bead into paint based on the ratio of 18-25 %( weight percentage). After application of such kind of paint on road work, the paint still can keep reflectivity after wear and friction of car wheels. The ratio is referring to the standard of Communication Industry Standard of People’s Republic of China No.JT/T280-2004. Standards will be different in countries and areas. According to the specification of Communication Industry Standard of People’s Republic of China No.JT/T446-2001, the granulometry is shown as table below. Gravity: 2.4-2.6g/cm3 Size scope (μm) Alternative NO.（mesh） content（%） 600 30 0 600-300 30-50 50-90 300-150 50-100 5-50 150 100 0-5 Reflective index:≥1.50 Roundness:≥80 Content of magnetic particles:≤0.1% Glass bead should be colorless, loosen and spherical particle, and should be free of cluster which can’t be loosen by slight impact. l面撒型（Drop On Glass Bead） 在涂料的施工的過程中，降熱烙型涂料加熱到一定溫度鋪在路面上來干時，隨即撒入玻璃珠，增強標線的反光性能。 按照中國交通行業標注JT/T280-2004的規定，面撒玻璃珠的粒度分布如下，其他參數與內混型玻璃珠保持一致。 During the application of paint on road work, thermoplastic paint should be to a certain level and used on the road surface as marking line, drop on glass bead should be dropped on the surface of line white it is still wet to increase the reflectivity of road marking line. According to the specification of Standard of Ministry of Transport of the People’s Republic of China No.GB/T24772-2009,the granulometry of drop on glass bead is shown as table below, other parameters are the same with intermix glass bead. Size scope (μm) Alternative NO.（mesh） Content（%） 850 20 0 850-600 20-30 5-30 600-300 30-50 30-80 300-106 50-140 10-40 106 140 0-5