有效物質含量:100（％）功能:無毒增塑劑主要用途:塑料做人A-666通用型塑料增韌劑 www.51chinaall.com0755-28996208伏小姐 型號：A-666顆粒增劑 品牌：金全牌和金珠牌顆粒增劑 Brand: 類型：聚酯增塑劑 有效物質含量：100（％） 功能：耐寒增塑劑 產品規格：20KG/件 主要用途：塑料增韌耐寒抗沖擊 CAS：108-52-63 金全牌和金蛛王牌塑料顆粒增韌劑產品用途： A-666適合任何塑料 金全牌和金蛛王牌塑料顆粒增韌劑的用法和用量： 1、成本極低，用量為0.6-1%，即1KG原料加入6-10克增韌劑，用量極少；請務必用25KG塑料試樣并且用混料機攪拌5-8分鐘（用幾KG料試不準）。 1.Ultra-low cost: Dosage is 0.6%~1% namely addle 6~10g toughner to 1KG material. Recommended dosage is 2%. Be sure that 25KG plastic sample is used and mixed in blender for 15~20minutes 2、用法簡單：只需在混料時把增韌劑加入，與水口料、再生料和原料混合攪拌5-8分鐘，拌勻后即可加熱烤料擠出、注塑或吹塑成型。 2. Simple usage: toughening agent is added in process of blending materials, recycled materials or raw materials for 5~8 minutes, when the materials has been uniformly blended, the mixture can be heated for extrusion and blow or injection molding. 3、要測試加入A-661/662/666/668金全牌和金蛛王牌和金蛛王塑料顆粒增韌劑的效果，請?jiān)跀D出、注塑或吹塑成型24小時后進行，這樣效果更加明顯；請用同種材質的膠料做比較，測試產品盡可能用平面無孔產品。 3. If you want to test the effection of A-661 Allgong brand plastic granule toughening agent, please carry out it after that the extrusion and injection or blow molding have been finished fou 24 hours. That will make the effection more obvious. Please compare it plastinof the same materials and try your best to use plane product without hole. 4、包裝、貯存和保質：紙塑袋或紙箱包裝，凈重20 KG/件，須注意防曬、防潮、防污染，本產品保質期三年。 4. Package, stockage and durability: package is paper box or plastic bag, and the net weight is 20KG/piece. Please keep away from insolation, moisture and contamination. Product durability is 3 years. 注意：使用本產品如不慎濺入眼中，請用大量清水沖洗或到附近醫院就診。 Caution: Detergent should be used to clean this product. If this product splashes into eyes, please flush the eyes with a great amount of water and go to see the doctor. 公司電話：0755-28996208 張先生：15986759891 聯系QQ：2321138678 公司網站：www.51chinaall.com