APV6氣壓式提動閥，標準規格 規格：APV6材質：聚四氟乙烯品牌：KGN型號：APV6產品別名：提動閥適用范圍：工業連接形式：如圖類型(通道位置)：直通式驅動方式：請咨詢用途：請咨詢適用介質：環氧樹脂·矽膠油·墨水·潤滑油·UV膠·RTV矽膠·電解液壓力環境：0.3-0.69MPa產品名稱 : 008-提動閥型號 : APV601N特點（Features）：?回吸機能，防止吐出滴漏 Reverse-sucking mechanism to prevent leakage or dripping during discharge.?回吸調整機能，可微量調整 Flow rate adjusting mechanism is provided with fine-tuning function.?接液部材質可依客戶需求對應各種膠材 The material of liquid receiving section will be selected according to the gel used upon the requirement of the customer. 概要 Outling: 提動閥關于空壓作動式閥，用0.30MPa以上的空氣壓就可開啟閥，并可透過內藏得彈簧來關閉閥?？捎糜贙GN的點膠機與壓送容器（膠管·壓力桶···等），還可調整材料的壓送壓力與閥的開放時間及搭配不同的針頭口徑尺寸，從微量吐出開始控制。此類閥于關閉時，還可發揮“回吸”材料之功能。 Poppet valve is a pneumatically operated valve. Valve is on when pressure is over than 0.30MPa and off by a built-in spring. When use dispense controller and pressure tank, the shot volume can be controlled to a very small amount by adjusting the mateial delivery pressure and the valve opening time. Valve has suck back effect to suck back the material before the valve is off. ˙Volume(c.c/min):0.1mPa/min water testing result. 流量(c.c/min):用水加壓0.1MPa持續吐出1分鐘所得之測試值。 適用材料（Applicable materials）:Model 型號Applicable materials 適用材料APV601NEpoxies.Silicone oil . lnks. Greaes.UV adhesives.Rtv silicones.Electrolytes.環氧樹脂·矽膠油·墨水·潤滑油·UV膠·RTV膠·電解液