產品品牌：臺銘

產品型號：TM107-15T

電源電壓：380

頻率范圍：50HZ

工作電源：380V

TM-107系列落地式油壓機特點：1． 采用整體焊接的堅固開式結構可使機身保持足夠鋼性的同時擁有最方便的操作空間；2． 壓力、行程、保壓時間、閉合高度均可按需求無級調整，也可設計為兩段速度（空載快速，加壓慢速），并可在使用行程內任意調整快速和工進的長短；3． 另可選增加測力傳感器及顯示器，精確顯示產品受力狀況，達到所需工作目的；4． 也可另選增加電子尺或光柵及顯示器，精確顯示油缸位移狀況，達到所需工作目的。適用范圍：TM107-20T數字壓裝機
1.該系列液壓壓床以2-20MPA的液體壓力為動力源,外接三相AC380V 50HZ或三相AC220 60HZ交流電源.
2.該系列設備以液體作為介質來傳遞能量，采用先進的子母缸液壓回路,油溫低,空行程速度均在150MM/秒以上, 工進速度30 MM/秒以下,
3.設備待機,滑快上下移動時噪音均不超過75分貝.
4.采用整體焊接的堅固開式結構,可使機身保持足夠的的鋼性,同時擁有最方便的操作空間,
5.分手動和半自動兩種控制方式,手動可將壓裝上模停在任意行程范圍內,配有緊急回升按鈕,也可加裝紅外線護手裝置.
6.該系列壓床的壓裝行程一般通過計時器,壓力開關,位置感應器,或客戶本身的模具進行控制
7.壓裝主軸的回升高度,可通過計時器,或位置感應器任意行程范圍內調整.
9.壓力、行程、保壓時間、閉合高度客戶均可自行調整,方便操作；
10.液壓系統計內置機架內,外觀整潔,輕巧,穩重.
11.具有自動計數功能,可也加裝測力顯示器,智能溫控儀,可依客戶要求定做,
12.該系列液壓機械出力范圍有15tf-100 tfFeatures:1.   The solid open type structure of welding as a whole allows the press to keep enough rigidity and makes the press being operated in a most convenient operating space.2.   The pressure, stroke, dwell time and shut height can be adjusted infinitely according to requirements; it may be applicable to set two speeds (idling speed, low speed during pressurization). And the speed and time can be adjusted at will within the stroke.3.   The middle template can be additional adopted to add force imposed on the products so as to complete the undergoing work.4.   The electronic ruler or grating ruler and display can be additionally added to precisely display the situation of the oil cylinder displacement so as to complete the undergoing work.Scope of Application:Embossing, forming, shallow draw, shaping and pressure assembling of metal or non-metal parts; press fitting of motor rotors and stators, electronic connectors and electric parts; pressing of glasses, locked modes and hardware parts, etc.