免費發布信息網站
貿易服務免費平臺
貿易服務免費平臺
|
公司基本資料信息
|
||||||||||||||||||||||||||||||
類型：其它
| 內徑:另定（mm） | 作用:固定密封 |
| 厚度:另定（mm） | 是否進口:否 |
| 材質:不銹鋼 | 是否標準件:標準件 |
| 適用范圍:汽車,門窗,電器,軸承,泵,氣缸,托輥,其他 | 性質:耐腐蝕,耐高溫,耐高壓,耐磨損,其他 |
| 樣品或現貨:現貨 | 截面形狀:O型 |
| 使用壓力:另定（MPa） | 使用溫度:另定（℃） |
| 外徑:另定（mm） | 內徑: |
| 作用: | 厚度: |
| 是否進口: | 材質: |
| 是否標準件: | 適用范圍: |
| 性質: | 樣品或現貨: |
| 截面形狀: | 使用壓力: |
| 使用溫度: | 外徑: |
Ring Joint Gasket
Ring joint gasket can be used under the vacuum condition of 1000kgf/cm and more for high-pressure vessel, tower and vessel, valve bonnet, etc. including high-temperature and high-pressure steam, oil, gas, solvent, etc.
There are oval type and octagonal type as its representative shape, which can be generally used for pressure of max. 350kgf/cm2 and there is BX type for more pressure. As for oval type and octagonal type, oval type has bigger flange groove deformation.
It is because gasket itself is deformed while bolt is extended until arriving to constant pressure by increased flange connection pressure and line contact is moved to surface contact as well. Therefore, it has good initial sealing performance but gasket is largely deformed.
When Octagonal type is internally pressured, contact pressure with flange is increased, which is initially connected to surface contact. So it requests high connection pressure. But as for sealing characteristics, we can t clearly say what type is better. Generally, octagonal type is widely used. RX type can be used for flange groove of ring joint gasket but BX type can be only used with API- STD-6BX flange.
-.
Name | Cross Section | KUKIL NO. |
API Type R oval ring-joint | RJO | |
API Type R octagonal ring-joint | RJS | |
API Type RX pressure engergized ring-joint | RJRX | |
API Type BX pressure engergized ring-joint | RJBX | |
Modified Bridgeman ring-joint | RJB | |
Delta ring-joint | RJD | |
Lens ring-joint | RJL | |
Double cone ring-joint | RJW | |
Round ring-joint | RJR | |
Weld ring | WDR |
-. RING JOINT GASKET HARDNESS Production Standards
Material | UNS No. | Hardness |
SOFT IRON | - | 90 |
CARBON STEEL | - | 120 |
ASTM A182-F5 | K42544 | 130 |
SS304 | S30400 | 160 |
SS304L | S30403 | 160 |
SS316 | S31600 | 160 |
SS316L | S31603 | 160 |
SS321 | S32100 | 160 |
SS347 | S34700 | 160 |
Inconel 600 | N06600 | 200 |
Inconel 625 | N06625 | 200 |
Incoloy 800 | N08800 | 200 |
Incoloy 825 | N08825 | 160 |
Hastelloy C276 | N10276 | 180 |
Duplex | S31803 | 230 |
-. Identification mark according to ASME B16.20 standards
-. Shape according to the classification of Ring Joint Gasket
點擊圖片查看原圖
