車 削CUTTING鉆 銑 削 DRILLING MILLING床身上最大工件回轉直徑Max.swing diameter over bed300mm最大鉆孔直徑Max.drilling capacity20mm最大工件長度Max.length of workpiece650mm主軸端面至工作臺面距離Disrance from bench to spindle nose240—320mm刀架上最大工件回轉直徑Swing diameter over tool carrier140mm主軸通孔直徑spindle bore26mm主軸孔莫氏錐度Taper of hole in spindle morseNo.4主軸中心線至立柱回轉表面距離Distance between spindle centre and the surface of column310mm刀架最大橫向行程Max.cross storke over small tool carrier200mm小刀架最大縱向行程Max.longitudinal stroke over small tool carrier80mm加工公制螺紋種數Metric thread kinds on processing14鉆銑頭箱繞立柱回轉角度Swivel-angle of milling and drilling headstock around the column360度加工英制螺紋種數Inch thread kind on processing20加工公制螺紋螺距范圍Metric thread pitch on processing0.5-3mm加工英制螺紋螺距范圍Inch thread pitch on processing11-40 1/n分鉆銑頭箱垂直升降行程Milling drilling headstock vertical stroke80mm縱向進給量級數Longitudinal feed grade20橫向進給量級數Cross feed grade20主軸轉速級數Spindle speed step9主軸每轉刀架的縱向進給量Longitudinal feed on spindle tool carrier0.036-1.43mm主軸轉速范圍Spindle speed scope315-2000r/min主軸每轉刀架的橫向進給量Coss feed on spindle tool carrier0.003-0.134mm工作臺面尺寸Bench dimension150*425mm尾座套筒的最大移動量Max.sroke of tailstock sleeve50mm電機Electric motor370W220V，50Hz(110V,60Hz)主軸轉速級數Spindle speed step6其它OTHERS主軸轉速度范圍Spindle speed scope160-1600r/min凈重Net weight240Kg電機Electric motor550W220V，50Hz(110V,60Hz)外型尺寸Overall dimension130*55*74mm選購購件SPECIAL OPTIONAL ACCESSORIES中心架 Steady rest1set跟刀架 Follow rest1set花盤 Face plate1set四爪卡盤 Four jaw chuck1set平口鉗 Maching vice1set組合車刀 Turning tool set1set銑刀盤 Face mill cutter1set方箱 Step block1pc工具柜 Tool-box1set